BC-0 Fixed Pedestal

The BC-0 is the lowest height Buzon pedestal fixed at 7/16″ (11 mm). It is non-adjustable and with the addition of the BC-PH5 slope corrector, the height is 1″ (23 mm). The BC-O can be stacked to increase height. See the BC Series Height Chart for details.

BC-1 Fixed Pedestal

The BC-1 is a fixed height Buzon pedestal fixed at 9/16″ (14 mm). It is non-adjustable and with the addition of the BC-PH5 slope corrector, the height is 1 1/8″ (28 mm).

BC-02 Pedestal

The BC-02 is the lowest profile Buzon screwjack pedestal that can be adjusted. It is made up of 2 pieces: BC-Top and BC-Base. It is height-adjustable from from 1-1/8″ to 1-9/16″ (28-40 mm). With addition of BC-PH5 slope corrector, the BC-02 is adjustable in height from 1-11/16″ to 2-1/8″ (40-52 mm) and slope from 0 to 5%.

BC-2 Pedestal

The BC-2 pedestal is composed of 2 pieces: BC-Top and BC-Base. It is height-adjustable from 1-9/16″ to 2-3/16″ (40-55 mm). With addition of BC-PH5 slope corrector, the BC-2 is adjustable in height from 2-1/8″ to 2-3/4″ (52-67 mm) and slope from 0 to 5%.

BC-3 Pedestal

The BC-3 pedestal is composed of 2 pieces: BC-Top and BC-Base. It is height-adjustable from 2-3/16″ to 3-3/8″ (55-85 mm). With addition of BC-PH5 slope corrector, the BC-3 is adjustable in height from 2-3/4″ to 3-15/16″ (67-97 mm) and slope from 0 to 5%.

BC-4 Pedestal

The BC-4 is made up of 1 BC-4-Base, 1 BC-4-Top, and 2 locking keys. It is height-adjustable from 3-3/8″ to 5-1/2″ (85-140 mm). With addition of BC-PH5 slope corrector, the BC-4 is adjustable in height from 3-15/16″ to 6-1/16″ (97-152 mm) and slope from 0 to 5%.

BC-5 Pedestal

The BC-5 is made up of 1 BC-5-Base, 1 BC-5-Top, and 2 locking keys. It is height-adjustable from 4-9/16″ to 7-7/8″ (116-200 mm). With addition of BC-PH5 slope corrector, the BC-5 is adjustable in height from 5-1/8″ to 8-7/16″ (128-212 mm) and slope from 0 to 5%.

BC-6-INV Pedestal

The BC6 is made up of a BC-4-Base, one BC-C4 coupler, and a BC-4-Top. It is height-adjustable from 7-13/16″ to 9-7/16″ (198-240 mm). With addition of BC-PH5 slope corrector, the BC-6-INV is adjustable in height from 8-3/8″ to 10″ (210-252 mm) and slope from 0 to 5%.

BC-7-C3 Pedestal

The BC7-C3 is made up of a BC-5-Base, one BC-C3 coupler, and a BC-5-Top. It is height-adjustable from 9-1/16″ to 14-3/16″ (230-360 mm). With addition of BC-PH5 slope corrector, the BC-7 is adjustable in height from 9-5/8″ to 14-3/4″ (242-372 mm) and slope from 0 to 5%.

BC-8-INV Pedestal

The BC8 is made up of a BC-5-Base, one BC-C3 coupler, one BC-C4 coupler, and a BC-5-Top. It is height-adjustable from 13-7/16″ to 18-5/16 (342-465 mm). With addition of BC-PH5 slope corrector, the BC-8-INV is adjustable in height from 14″ to 18-7/8″ (354-477 mm) and slope from 0 to 5%.

BC-9-INV Pedestal

The BC9 is made up of a BC-5-Base, two BC-C3 couplers, a BC-C4 coupler, and a BC-5-Top. It is height-adjustable from 17-13/16″ to 24-13/16 (452-630 mm). With addition of BC-PH5 slope corrector, the BC-9-INV is adjustable in height from 18-3/8″ to 25-3/8″ (464-642 mm) and slope from 0 to 5%.

BC-10-INV Pedestal

The BC-10-INV is composed of 6 pieces: BC-5-NSC (top+ base) + 1 BC-C4 inverter + 3 BC-C3 couplers. All units are built together to get one full product. It is height-adjustable from 22-1/8″ to 31-5/16″ (562-795 mm). With addition of BC-PH5 slope corrector, the BC-10-INV is adjustable in height from 22-11/16″ to 31-7/8″ (574-807 mm) and slope from 0 to 5%.

BC-11-INV Pedestal

The BC-11-INV pedestal is composed of 7 pieces: BC-5-NSC (top + base) + 1 BC-C4 inverter + 4 BC-C3 couplers. All units are built together to get one full product. It is height-adjustable from 26-7/16″ to 38″ (672-965 mm). With addition of BC-PH5 slope corrector, the BC-11-INV is adjustable in height from 27″ to 38-9/16″ (684-977 mm) and slope from 0 to 5%.

BC-12-INV Pedestal

The BC-12-INV is composed of 8 pieces: BC-5-NSC (top + base) + 1 BC-C4 inverter + 5 BC-3 couplers. All units are built together to get one full product. It is height-adjustable from 30-13/16″ to 44-1/2″ (782-1130 mm). With addition of BC-PH5 slope corrector, the BC-12-INV is adjustable in height from 31-3/8″ to 45-1/16″ (794-1142 mm) and slope from 0 to 5%.

U-EXTENDER-30 + PB 2

Fixed-height 1 3/16″ (30mm) extension accessory that simply attaches to the base of PB and BC pedestals, in order to increase the height of the pedestal. Can be stacked up to a maximum of 4, reaching a maximum additional height of 4 3/4″ (120mm). The U-PH5 slope corrector accessory can be used underneath the extenders.

BC-U SHIM

The U-SHIM 5 mm riser accessory adds 3/16″ (5 mm) height to Buzon pedestals, with the option to stack up to 4 elements for precise adjustments on-site. Ideal for addressing small height variations with ease. The U-SHIM pairs seamlessly with the U-PH5 slope corrector.

BC-U-E20 Rubber Shims

Buzon Pedestals accommodate decking materials with different thickness by using U-E10 (1 mm) or U-E20 (2 mm) rubber shims placed under the flagstone or decking tile that needs to be compensated.

BC-TAB-R

The Buzon Pedestal System BC Series rectangular spacing tabs keep materials perfectly aligned, equally spaced, and at 90 degree angles.

BC-TAB-C

The Buzon Pedestal System BC Series provides endless design possibilities by using 360° independently rotating circular spacer tabs to line up non-dimensional materials perfectly.

U-PH5 Slope Corrector

The U-PH5 slope corrector is an adjustable unit equipped with two rotary plates allowing the adjustment of an angle between 0 and 5%. It is placed under the base of Buzon BC or PB series pedestals to achieve a horizontal (slope-corrected) or inclined terrace as desired. The U-PH5 Key foot accessory allows installers to keep the orientation of the slope corrector fixed when adjusting the height.

PH5 Top-Mounted Slope Corrector

The PH5 top slope corrector snaps onto the head of the BC pedestal. It can be used to slope correct or to create ramps with a desired degree of slope. Each DPH-PH5 compensates slope up to 5% in increments of 0.5%. For use with all pedestals in the BC range. When used in conjunction with the U-PH5 base slope corrector, slope correction of up to 20% can be achieved.

BC-KIT 2

Buzon Pedestal accessory for holding timber or aluminum joists: includes batten support plate, adjustable side clamps, support fastener and safety lock pin. Supports dimensional timber from 35 to 90 mm (1-3/8″ to 3-1/2″).

BC-KIT-5

The BC-KIT-5 joist cradle conveniently attaches to the head of the BC range of pedestals. Its primary function is to securely fasten the joist to the pedestal, facilitating the smooth installation of timber or composite terraces.

BC-U-WASHER

The BC U Washer package contains a stainless steel locking disc and screw to securely affix outdoor decking tiles to the Buzon BC Series pedestal head for increased wind resistance.

BC-Fastener

The BC-U-Fastener fastening system secures wood deck tiles to the Buzon pedestal head. Use with ipe wood pavers or Thermory hardwood decking tiles.

BC-U-Edge

The U-EDGE is an adaptable edge support that can be used with all ranges of Buzon® pedestals. Due to its design it creates a quick and easy solution to complete the installation at the edge of a terrace. It can be used with any size of spacer tab and all shapes of paving. Easily design curves, angles, and straight lines into your terrace.

PB-End

The PB-End can be used to create a lateral edge or full corner to completely cover the pedestal cavity. Each PB-End is comprised of 3 parts: the U-End-Base, U-End-Lock, and the PB-End-Top. Now you can create or add a finished skirt at the perimeter of raised terraces in case you don’t have an adjoining parapet on your structure or other borders to hide the pedestal / decking / joist edges. PB-END works with BC and PB series pedestals.

BC-U-WALL Perimeter Spacer + E20

The U-Wall accessory can be attached to all ranges of Buzon® Pedestal. It creates a uniform 5 mm (or greater) gap between the paver and the wall, enabling water flow which protects the terrace in the case of heavy rainfall. U-WALL can be installed on terraces of any shape: angular, curved, etc. The U-E10/20 Wall is a 1 or 2 mm shim. Placed on the U-WALL support, it stabilizes the paver, provides additional acoustic comfort, and compensates for variations in paver thickness.

BC-U-WALL+ U-E20

The U-Wall accessory can be attached to all ranges of Buzon Pedestal. It creates a uniform 5 mm (or greater) gap between the paver and the wall, enabling water flow which protects the terrace in the case of heavy rainfall. U-WALL can be installed on terraces of any shape: angular, curved, etc. U-Wall adds 3 mm additional height and is used only with 6mm tabs (maximum). Versatile U-E20 rubber shims provide additional acoustic comfort, and compensate for variations in paver thickness.

BC-U-WALL + U-E20 + Screws

The U-Wall accessory can be attached to all ranges of Buzon Pedestal. It creates a uniform 5 mm (or greater) gap between the paver and the wall, enabling water flow which protects the terrace in the case of heavy rainfall. U-WALL can be installed on terraces of any shape: angular, curved, etc. U-Wall adds 3 mm additional height and is used only with 6mm tabs (maximum). The U-WALL can be fixed to the pedestal with screws to keep the paving in position. Versatile U-E20 rubber shims provide additional acoustic comfort, and compensate for variations in paver thickness.