PB Series Components
1. Head The head support is screwed directly onto the base or the coupler. The many different head attachments make the PB pedestal a favorite with contractors.
2. Coupler The coupler is used when the height of the pedestal exceeds 200 mm. Two wire hooks on the sides allow for the pedestals to be tied to each other, guaranteeing greater stability when the height exceeds 600 mm.
3. Base The base is 3–4.5 mm thick polypropylene with 205mm in diameter. The base can be placed or fixed to a solid substrate. The pedestal can be cut away for positioning against a wall. It also has holes at the bottom for drainage. The PH5 slope corrector and numerous accessories are available to support all types of materials and structures.
4. Slope Corrector The BC-PH5 can compensate, a horizontal, a slope from 0 to 5% (slope from 0 to 5 cm per meter). This is placed under the base of the pedestal.