3cm Series Drive-Over Porcelain Pavers

Home » Products » 3cm Series Drive-Over Porcelain Pavers

SH 3cm Series (SH1.2) Heavy-Duty Porcelain Pavers

HDG’s SH 3cm Series drive-over porcelain pavers are engineered for demanding outdoor environments where vehicle loads, surface impacts, and long-term durability are critical. At 3cm (1.2”) thick, these porcelain driveway pavers provide significantly higher mechanical strength than standard 2cm pavers, making them ideal for residential driveways, parking areas, ramps, garages, and commercial applications.

SH1.2 Series pavers are 3cm (1.2”) thick solid porcelain stoneware pavers. These extra thick pavers are characterized by the same high quality of standard 2cm thick pavers but with higher mechanical strength. SH 3cm pavers are 50% thicker than 2cm (3/4″) thick porcelain pavers, making them much stronger and more resistant to impact breakage.

Drive-Over Applications

Use SH 3cm pavers when you need the extra assurance against impact breakage or need to bear heavy loads in public or private spaces. The ability to carry heavy loads and resist impact breakage makes this series a perfect choice for outdoor spaces. SH 3cm pavers are especially suitable for drivable surfaces including parking lots, pads, garages, driveways, ramps, entrance areas, woonerfs, boulevards, and tracks of all types.

Installing Drive-Over Porcelain Pavers

Proper installation is essential for porcelain driveway pavers to perform under vehicle loads. Like other HDG Porcelain Pavers this SH 3cm paver series can be laid over sand or gravel, hard substrates such as concrete, or installed over slope-correcting, height-adjustable Buzon pedestals for raised applications.

Porcelain Pavers in Garage Application - HDG Building Materials

Greater Breaking Strength Compared to 2cm Structural Porcelain Pavers

High safety due to the breaking load class guaranteed according to EN 1339 U 30.

2cm Breaking Strength: >10000
3cm Breaking Strength: >29000N

More Resistant to Wind Uplift

SH1.2 3cm Series Porcelain pavers are 50% heavier and more resistant to wind uplift compared to 2cm pavers. There is no need for reinforcement backing when setting on Buzon pedestals. Use from less than 1/2″ up to 44″ tall. HDG offers a custom kerf-slot solution on the edges of these pavers. Kerf-cut pavers are used together with the Buzon PB-Clip KIT1 plug, SS Washer and screw to mechanically-fasten these pavers to the pedestal heads for total safety. An installation guide is available upon request.

SH 3cm Porcelain Pavers are heavier and more wind resistant - HDG Building Materials

Install Over A Variety Of Substrates

Sand or Gravel

Install over compacted sand or gravel.

Hard Substrate

Install over hard, level surfaces including concrete.

Pedestal Systems

Install over slope-correcting, height-adjustable Buzon screwjack pedestals

Benefits of 3CM Driveway Porcelain Pavers

Load bearing, especially resistant to heavy road loads
Robust, load bearing guaranteed even when laid on dry sand and gravel
Durable, wear resistant thanks to high surface hardness
Easy to clean, stain proof
Anti-frost, guaranteed frost resistance
Non-slip, R11 slip resistance
Ecological, an environmentally friendly product
Less expensive that many other paving surface solutions

3 cm SH Series HDG Porcelain Pavers Drive Over Large Vehicles - HDG Building Materials

Available Drive-Over Porcelain Paver Sizes

Architects and landscape designers who wish to create large open public and private spaces will appreciate the 10 colors that are available in the 90×90 cm large square format.

Sizes Available With Natural and/or Rectified Edges:

90×90 (36″x36″)
60×60 (24″x24″)
40×60 (16″x24″)
40×80 (16″x32″)

See Porcelain Paver Sizes Demystified

Why 3CM Porcelain Pavers Are Ideal for Driveways

Built for Vehicle Loads and Impact Resistance

Driveway surfaces experience forces well beyond foot traffic, including vehicle weight, braking stress, and point loads from tires. 3cm porcelain pavers are engineered specifically for these conditions, offering substantially higher breaking strength than standard 2cm pavers. Their increased thickness and mass allow loads to be distributed evenly across the substrate, reducing the risk of cracking or structural failure over time.

This performance makes 3cm porcelain pavers well suited for driveways, parking areas, garages, ramps, and other drivable surfaces in both residential and commercial environments.

Why Thickness Matters: 3CM vs 2CM Pavers

While 2cm porcelain pavers are ideal for patios, terraces, walkways, and rooftop decks, 3cm pavers are designed for drive-over applications. The additional thickness provides greater flexural and compressive strength, enhances stability under rolling loads, and supports installation over compacted sand or gravel, or concrete substrates. HDG also offers pre-kerf-slotted pavers for pedestal-set applications with wind uplift hold down clips.

In addition to structural benefits, 3cm porcelain pavers are available in a wide range of finishes, including stone-look, concrete-look, and darker colorways such as black and charcoal, allowing driveway areas to visually integrate with surrounding hardscape and architectural elements.

Offered in stone-look, concrete-look, and wood-look aesthetics, 3 cm porcelain driveway pavers deliver both structural durability and design versatility. Darker colorways such as black and charcoal are commonly specified for drive applications, as they visually ground exterior compositions and better conceal tire marks, staining, and surface wear over time.

3cm porcelain driveway pavers supporting vehicle traffic in a public garage entrance.

Looking for Black Driveway Porcelain Pavers?

HDG offers a curated selection of black 3CM porcelain pavers engineered for drive-over applications. Choose from concrete-look, stone-inspired, slate, and basalt finishes designed to perform under vehicle loads while delivering a refined architectural aesthetic.

Explore Black Driveway Porcelain Pavers

Colors and Finishes for Drive-Over Porcelain Pavers

SH 3cm series pavers are available in a variety of colors and finishes. Choose among several wood, stone, and concrete finishes. Designers can select pavers from among these color families: Black, Beige/Tan, Black, Grown, Cream/White, and Grey. The results of the color filter below show both Legno (wood-look) and Pietra (stone-look). Select Legno to view only wood-finish or Pietra to view only stone-finish porcelain tile collections.

If you see an image that inspires you, simply select it by clicking through to reveal more details on that particular collection. You’ll see color, finish and sizes available for that particular selection and see related colors that collection.